TABLE 15--Summary of numerical analysis of Mackinneyella stylettia n. sp.  Abbreviations as in Table 1.  
Budding angles in degrees, other measurements in millimeters following procedures in Snyder 
(1991).
_____________________________________________________________________________________
_____________________________________________________________________________________

		Nf	Nm	Xs	Xl	X	SD	CV
_____________________________________________________________________________________

Width of branch	4	40	1.600	2.980	2.284	0.340	14.96
Distance between branch centers	4	17	2.110	3.440	2.622	0.411	15.51
Width of dissepiment	4	24	0.470	2.060	0.899	0.450	50.09
Length of fenestrule	4	19	0.830	3.910	2.166	1.000	46.14
Width of fenestrule	4	19	0.420	1.750	0.921	0.350	37.95
Apertures per fenestrule length	4	10	5		10		7.6	0	1.80	23.68
Aperture length	4	25	0.208	0.312	0.253	0.025	9.72
Aperture width	4	48	0.110	0.250	0.172	0.030	17.39
Distance between  closest 	
	apertures down branch	4	20	0.251	0.490	0.341	0.078	22.79
Distance between closest 
	apertures across branch	4	20	0.250	0.307	0.279	0.016	5.55
Distance between closest 
	apertures across fenestrule	4	12	0.920	1.813	1.462	0.315	21.57
Diameter of compound stylet	4	13	0.151	0.205	0.177	0.017	9.60
Diameter of stylets, obverse	4	24	0.005	0.010	0.007	0.001	18.32
Width of peristome	4	18	0.016	0.023	0.020	0.002	10.00
Thickness reverse wall, granular	4	53	0.050	0.560	0.240	0.132	55.24
Thickness lateral wall	4	36	0.020	0.210	0.102	0.048	47.13
Front wall thickness, laminated	4	47	0.150	0.540	0.377	0.106	28.27
Reverse wall thickness, laminated	4	47	0.130	0.550	0.329	0.097	29.48
Chamber length	4	29	0.410	0.860	0.717	0.126	17.63
Chamber depth	4	32	0.150	0.290	0.206	0.041	19.87
Maximum width of chamber	4	57	0.140	0.300	0.193	0.032	16.79
Minimum width of chamber	4	54	0.040	0.190	0.091	0.040	43.13
Thickness branch	4	47	0.850	2.240	1.430	0.031	22.00
Reverse wall budding angle	4	12	62		75		68.6		3.64	5.31
Lateral wall budding angle,	
	adaxial chambers	4	14	3		19		8.0		4.24	53.04
Lateral wall budding angle,
	abaxial chambers	4          14         25	              48            38.8           6.82        17.56
_____________________________________________________________________________________